
WARNING! Upgrade by RS232 is for advanced users. Normally you can upgrade software by USB.


How to upgrade reciver by RS232?

1. Connect PC and Receiver with RS232 nullmodem cable. Warning! in X406p RS232 is only on mainboard, not on back panel.

2. Open Upgrade_tool_Opticum_X405p_X406p.exe PC tool, press OPEN and select right file to update
(should be upgrade file, with *.bin extemsion)

3. turn off receiver totally, by power switch

4. on frontpanel press POWER key before power on the box, then turn on receiver by power switch, on frontpanel display will blink "H"

5. during blinking "H" on reciever display, press "Start" on Upgrade_tool_Opticum_X405p_X406p.exe pc tool, it will automatically start to 
 download sw and  burn to flash. ypu will see progress on receiver display and on PC tool. wait untill finishing.

6. After it finish the upgrade, power off and power on box again.

www.ijachouf.com
www.stbsw.com

  This file has been downloaded from www.ijachouf.com



  Our Upload Center

  Link: www.ijachouf.com


  Receiver Updates

  Link: http://www.ijachouf.com


                                      )|(
                                     (o o)
 +-------------------------------ooO--(_)--Ooo-------------------------------+
 |                                                                           |
 | Viewing pay TV without a valid subscription is illegal!                   |
 | All the files available on ijachouf.com are kept for educational    |
 | purpose only and should not be downloaded whatsoever!                     |
 | Nobody is responsible for any of the files stored on swtools.biz,  |
 | their content can damage your system!                                     |
 |                                                                           |
 +---------------------------------------------------------------------------+